機能リスト
提供: VyOS jp
As of 1.1.x, VyOS features include:
目次
Platform support
- 32-bit x86
- 64-bit x86
- KVM (virtio drivers included)
- Xen HVM (including XenServer and EC2)
- VMWare (open-vm-tools included)
- Hyper-V (drivers included)
- VirtualBox (guest additions not included)
Serial console is enabled by default, comes in handy on headless machines and embedded boards.
Routing
- BGP (IPv4 and IPv6)
- OSPFv2
- OSPFv3 (incomplete)
- RIP
- RIPng
- Policy-based routing
Network interfaces
- Ethernet
- 802.1q VLAN, QinQ
- NIC bonding
- Bridges, STP (no RSTP or other extensions)
- Port mirroring and redirection
- Dummy interfaces (analogous to multiple loopbacks)
- Pseudo-ethernet (aka MAC VLAN)
- 802.11 wireless (client and access point)
- Some wireless modems (not very good support)
- PPPoE
Note: No support for serial WAN, ISDN, dial-up, DSL cards. Use an external device for that.
Firewall and NAT
- Stateful firewall
- Network/address/port groups (IPv4 only for now)
- Zone-based firewall
- Source and destination NAT
VPN
- Site-to-site IPsec (with pre-shared key or x.509 authentication)
- VTI (Virtual Tunnel Interfaces)
- OpenVPN (client, server, site-to-site)
- GRE, IPIP, IPIP6, IP6IP6 tunnels
- VXLAN
- Unmanaged L2TPv3
- L2TP/IPsec and PPTP remote access VPN
- DMVPN (experimental)
Network services
- DHCP server and relay
- Caching DNS server
- Web proxy with some URL filtering support (no HTTPS filtering)
- Telnet and SSH for remote management
- IGMP proxy
- QoS support
High availability
- VRRP (IPv4 only for now)
- Conntrack sync
- WAN failover and load balancing
IPv6 support
- IPv6 routing (static and dynamic)
- Router advertisment
- DHCPv6 client and server/relay
- IPv6 firewall
System maintenance and monitoring
- Task scheduler
- SNMP
- Configuration versioning and remote archiving
- Event handling
- Remote syslog