機能リスト

提供: VyOS jp
移動: 案内検索

As of 1.1.x, VyOS features include:

Platform support

  • 32-bit x86
  • 64-bit x86
  • KVM (virtio drivers included)
  • Xen HVM (including XenServer and EC2)
  • VMWare (open-vm-tools included)
  • Hyper-V (drivers included)
  • VirtualBox (guest additions not included)

Serial console is enabled by default, comes in handy on headless machines and embedded boards.

Routing

  • BGP (IPv4 and IPv6)
  • OSPFv2
  • OSPFv3 (incomplete)
  • RIP
  • RIPng
  • Policy-based routing

Network interfaces

  • Ethernet
  • 802.1q VLAN, QinQ
  • NIC bonding
  • Bridges, STP (no RSTP or other extensions)
  • Port mirroring and redirection
  • Dummy interfaces (analogous to multiple loopbacks)
  • Pseudo-ethernet (aka MAC VLAN)
  • 802.11 wireless (client and access point)
  • Some wireless modems (not very good support)
  • PPPoE

Note: No support for serial WAN, ISDN, dial-up, DSL cards. Use an external device for that.

Firewall and NAT

  • Stateful firewall
  • Network/address/port groups (IPv4 only for now)
  • Zone-based firewall
  • Source and destination NAT

VPN

  • Site-to-site IPsec (with pre-shared key or x.509 authentication)
  • VTI (Virtual Tunnel Interfaces)
  • OpenVPN (client, server, site-to-site)
  • GRE, IPIP, IPIP6, IP6IP6 tunnels
  • VXLAN
  • Unmanaged L2TPv3
  • L2TP/IPsec and PPTP remote access VPN
  • DMVPN (experimental)

Network services

  • DHCP server and relay
  • Caching DNS server
  • Web proxy with some URL filtering support (no HTTPS filtering)
  • Telnet and SSH for remote management
  • IGMP proxy
  • QoS support

High availability

  • VRRP (IPv4 only for now)
  • Conntrack sync
  • WAN failover and load balancing

IPv6 support

  • IPv6 routing (static and dynamic)
  • Router advertisment
  • DHCPv6 client and server/relay
  • IPv6 firewall

System maintenance and monitoring

  • Task scheduler
  • SNMP
  • Configuration versioning and remote archiving
  • Event handling
  • Remote syslog